Are you a company or a professional?

REGISTER

Seko conductivity probe

Seko conductivity probe (See table)(See table)
Measurement range: 0,005 µS/cm - 400 mS/cm
Maximum pressure: 16 bar
Working temp: 0 -130 °C
Body: Plastic/glass

SELECT MODEL TO VIEW PRICE AND DELIVERY TIME

Reference:

Models:

Estimated delivery time:

Working days (check to confirm) (Unless unavailable)

Free shipping on orders over 300€ (VAT NOT INCLUDED). Only in Spain Peninsula and Portugal

Models

More information about this product

Total price units (without discounts)

The prices shown including VAT have been calculated on the basis of the current VAT rate for Spain. If you are buying from outside Spain both prices shown are exclusive of VAT (VAT will be calculated in the checkout process before finalising the order).
NOTE: For sales outside the European Union, customs clearance costs, duties and taxes shall be borne by the customer.

Secure 100% payments:

Categories: Analysis. Conductivity.

Tags: conductividad Seko. electrodo conductividad. sensor conductividad. Sonda conductividad.

Seko conductivity probe

GENERAL DESCRIPTION Conductivity probe Seko

Technical characteristics

See models

Technical characteristics

See models

Water treatment professionals choose SEKO electrical conductivity probes for their accuracy, reliability and repeatable results.

Conductivity represents one of the fundamental parameters for determining the quality of water and liquids in general, as it is linked to the concentration of ions responsible for electrical conduction in a solution.

Electrical conductivity is the reciprocal of electrical resistivity and measures the ability of a solution to conduct an electrical current when an alternating voltage is applied to a measuring cell consisting of two or four electrodes.

To compensate for the geometry of the cell, each probe is characterised by a constant that can be expressed in two ways that are inverses of each other and are indicated by the letters K and C, the former expressed in cm and the latter in cm-1.

The conductivity of a solution is generally expressed in μS/cm.

SEKO probes and sensors catalogue

Your World is Ours

CHARACTERISTICS SEKO CONDUCTIVITY PROBE TECHNIQUES

Specific characteristics of CK-X-SS-PP probes

Measurement range:

Model CK-1-SS-PP: 0.5 - 5000 µS/cm
Model CK-5-SS-PP: 0.1 - 1000 µS/cm
Model CK-10-SS-PP: 0.05 - 500 µS/cm

Probe constant k:

Model CK-10-SS-PP: 10 cm
Model CK-5-SS-PP: 5 cm
Model CK-10-SS-PP: 10 cm

Working temperature: 0 - 60 ºC
Maximum pressure: 6 bar
Body material: PP
Electrode material: SS316L
Mechanical connection: 1/2" GAS M
Cable: 5 m
Temperature sensor: No
Applications:

Reverse osmosis
Irrigation
Waste water
Drinking water
Cooling towers

Specific characteristics of CTK-X-SS-PP probes

Measurement range:

Model CTK-1-SS-PP: 0.5 - 5000 µS/cm
Model CTK-5-SS-PP: 0.1 - 2000 µS/cm
Model CTK-10-SS-PP: 0.05 - 500 µS/cm

Probe constant k:

Model CK-1-SS-PP: 1 cm
Model CK-5-SS-PP: 5 cm
Model CK-10-SS-PP: 10 cm

Working temperature: 0 - 80 ºC
Maximum pressure: 6 bar
Body material: PP
Electrode material: SS316L
Mechanical connection: 3/4" GAS M
Cable: No (detachable connector)
Temperature sensor: PT100
Applications:

Irrigation
Waste water
Drinking water
Cooling towers

Specific characteristics of CTK-1-GR-PP probes

Measuring range: 0.5 - 50,000 µS/cm
Probe constant k: 1 cm
Working temperature: 5 - 100 ºC
Maximum pressure: 5 bar
Body material: PP + 30% graphite
Electrode material: Graphite
Mechanical connection: 1/2" GAS M
Cable:

Model CTK-1-GR-PP-5: 5 m
Model CTK-1-GR-PP-10: 10 m

Temperature sensor: PT100
Applications:

Industrial processes
Waste water
Drinking water
Boilers
Salt water

Specific characteristics of the CTK-1-GR-EP probe

Measuring range: 0.5 - 20,000 µS/cm
Probe constant k: 1 cm
Working temperature: 0 - 70 ºC
Maximum pressure: 7.5 bar
Body material: Epoxy
Electrode material: Graphite
Mechanical connection: 12 mm
Cable: 6 m
Temperature sensor: PT100
Applications:

Irrigation
Waste water
Drinking water
Cooling towers

AVAILABLE MODELS

MODEL	REFERENCE	Conductivity range	Temperature sensor	Electrode material	Cable	Mechanical connection
CK-1-SS-PP	9900101010	0,5 - 5.000 µS/cm	NO	SS316L	5 m	1/2″ GAS M
CK-5-SS-PP	9900101011	0,1 - 1.000 µS/cm	NO	SS316L	5 m	1/2″ GAS M
CK-10-SS-PP	9900101012	0.05 - 500 µS/cm	NO	SS316L	5 m	1/2″ GAS M
CKT-1-SS-PP	9900101101	0,5 - 5.000 µS/cm	Pt100	SS316L	NO	3/4″ GAS M
CKT-5-SS-PP	9900101102	0,1 - 2.000 µS/cm	Pt100	SS316L	NO	3/4″ GAS M
CKT-10-SS-PP	9900101103	0.05 - 500 µS/cm	Pt100	SS316L	NO	3/4″ GAS M
CKT-1-GR-PP-5	9900316028	0.5 - 50,000 µS/cm	Pt100	Graphite	5 m	1/2″ GAS M
CKT-1-GR-PP-10	9900316029	0.5 - 50,000 µS/cm	Pt100	Graphite	10 m	1/2″ GAS M
CKT-1-GR-EP	9900101124	0,5 - 20.000 µS/cm	Pt100	Graphite	6 m	12 mm

AVAILABLE MODELS

MODEL	REFERENCE	Conductivity range	Temperature sensor	Electrode material	Cable	Mechanical connection
CK-1-SS-PP	9900101010	0,5 - 5.000 µS/cm	NO	SS316L	5 m	1/2″ GAS M
CK-5-SS-PP	9900101011	0,1 - 1.000 µS/cm	NO	SS316L	5 m	1/2″ GAS M
CK-10-SS-PP	9900101012	0.05 - 500 µS/cm	NO	SS316L	5 m	1/2″ GAS M
CKT-1-SS-PP	9900101101	0,5 - 5.000 µS/cm	Pt100	SS316L	NO	3/4″ GAS M
CKT-5-SS-PP	9900101102	0,1 - 2.000 µS/cm	Pt100	SS316L	NO	3/4″ GAS M
CKT-10-SS-PP	9900101103	0.05 - 500 µS/cm	Pt100	SS316L	NO	3/4″ GAS M
CKT-1-GR-PP-5	9900316028	0.5 - 50,000 µS/cm	Pt100	Graphite	5 m	1/2″ GAS M
CKT-1-GR-PP-10	9900316029	0.5 - 50,000 µS/cm	Pt100	Graphite	10 m	1/2″ GAS M
CKT-1-GR-EP	9900101124	0,5 - 20.000 µS/cm	Pt100	Graphite	6 m	12 mm

OTHER OPTIONS AVAILABLE (ON REQUEST)

Model

CTK-1-SS-PF, body PVDF
CTK-100-SS-SS, very low conductivity
CKT-01-PT-EX, high conductivity

DOCUMENTS

Datasheet conductivity probes CK-X-SS-PP

Technical data sheet conductivity probes CTK-1-GR-PP

Technical data sheet conductivity probes CTK-X-SS-PP

Datasheet conductivity probe CTK-1-GR-EP

Accessories

<p>

Select options
Peristaltic dosing pump SEKO PoolOne CS/RG
92,60 € (RRP)
(excluding VAT: 92,60 €)
Rated 0 out of 5
Select options This product has multiple variants. The options may be chosen on the product page
Select options
Hydraulic pump SEKO HYDRAKOS
350,50 € (RRP)
(excluding VAT: 350,50 €)
Rated 0 out of 5
Select options This product has multiple variants. The options may be chosen on the product page
Select options
Electrode cable with S7 connection
59,30 € (RRP)
(excluding VAT: 59,30 €)
Rated 0 out of 5
Select options This product has multiple variants. The options may be chosen on the product page
Select options
Chemitec 46 Series dual parameter
699,10 € (RRP)
(excluding VAT: 699,10 €)
Rated 0 out of 5
Select options This product has multiple variants. The options may be chosen on the product page
Select options
Chemitec 46 mA ppm Series
628,30 € (RRP)
(excluding VAT: 628,30 €)
Rated 0 out of 5
Select options This product has multiple variants. The options may be chosen on the product page
Select options
Chemitec 46D Series
628,30 € (RRP)
(excluding VAT: 628,30 €)
Rated 0 out of 5
Select options This product has multiple variants. The options may be chosen on the product page
Select options
Chemitec 50 Series
1.045,00 € (RRP)
(excluding VAT: 1.045,00 €)
Rated 0 out of 5
Select options This product has multiple variants. The options may be chosen on the product page
Add to basket
Chemitec 70CT Series
1.116,20 € (RRP)
(excluding VAT: 1.116,20 €)
Rated 0 out of 5
Add to basket
Add to basket
Chemitec 70DW Series
1.488,20 € (RRP)
(excluding VAT: 1.488,20 €)
Rated 0 out of 5
Add to basket
Select options
Chemitec Series 80
2.223,00 € (RRP)
(excluding VAT: 2.223,00 €)
Rated 0 out of 5
Select options This product has multiple variants. The options may be chosen on the product page
Add to basket
Chemitec S401 DIFF/N digital differential pH electrode
759,90 € (RRP)
(excluding VAT: 759,90 €)
Rated 0 out of 5
Add to basket
Add to basket
Chemitec S406 DIFF/N Chemitec S406 DIFF/N digital differential redox electrode
970,50 € (RRP)
(excluding VAT: 970,50 €)
Rated 0 out of 5
Add to basket
Select options
Digital pH electrode Chemitec S401 DIG/N
394,90 € (RRP)
(excluding VAT: 394,90 €)
Rated 0 out of 5
Select options This product has multiple variants. The options may be chosen on the product page
Select options
Chemitec S406 DIG/N digital redox (ORP) electrode Chemitec S406 DIG/N
448,10 € (RRP)
(excluding VAT: 448,10 €)
Rated 0 out of 5
Select options This product has multiple variants. The options may be chosen on the product page
Select options
UV lamps
98,40 € (RRP)
(excluding VAT: 98,40 €)
Rated 0 out of 5
Select options This product has multiple variants. The options may be chosen on the product page
Select options
Seko Kontrol 800 control panel
1.131,50 € (RRP)
(excluding VAT: 1.131,50 €)
Rated 0 out of 5
Select options This product has multiple variants. The options may be chosen on the product page
Add to basket
Chemitec bypass probe holder PSS8-B1
124,70 € (RRP)
(excluding VAT: 124,70 €)
Rated 0 out of 5
Add to basket
Select options
Chemitec S315/F immersion probe holder
139,30 € (RRP)
(excluding VAT: 139,30 €)
Rated 0 out of 5
Select options This product has multiple variants. The options may be chosen on the product page
Select options
Chemitec S315/O immersion probe holder
181,60 € (RRP)
(excluding VAT: 181,60 €)
Rated 0 out of 5
Select options This product has multiple variants. The options may be chosen on the product page
Add to basket
Chemitec S305/INS Insertion Probe Holders
788,00 € (RRP)
(excluding VAT: 788,00 €)
Rated 0 out of 5
Add to basket